Showing 1–12 of 18 results

Cabin Hooks

£1.80£3.60

Cabin hooks are a popular way of shutting or opening small wooden gates or as the name suggest holding little ‘cabin’ doors back. They are typically found on garden sheds, garden gates, play houses, animal shelters and dog kennels

Brenton / Pad Bolts

£2.40£5.40

This Brenton bolt is recommended for internal & external use. It is ideal for securing doors.

  • Steel construction
  • Fixings supplied

Features and benefits

  • Can be used with a padlock for added security

Loop Bolt Receiver

£4.80 inc VAT (£4.00 ex VAT)

Made from heavy duty 5mm thick mild steel this loop bolt receiver is commonly used on most gate ways using metal gates and some wooden gates depending on the ironmongery. It comes galvanised for a long life, as standard.

Traditionally people would drill the wooden shutting post to allow a bolt to slide in the hole and therefore fasten the gate, however we now know that this seriously damages the lifespan of the wooden post by breaking the treatment barrier. Hence the new popularity of the loop receiver.

Suffolk Latch

£6.00 inc VAT (£5.00 ex VAT)

Its doesn’t get any more traditional than a Suffolk latch.

This has been one of the most popular gate clapping products for years and years. Ours is a newer take on the traditional design slimmed down for a slimmer and more sleek design. As with most of our hardware it comes galvanised to provided a long life and to prevent against rot and rust.

The Suffolk latch is used frequently by landscapers, gardeners and fencing professionals with great success. It is commonly used on side gates to the rear of peoples properties on gates that are solid. The beauty of the Suffolk latch is that is allows the gate to be opened from from both sides but also allowing the gate to be much taller than the standard gates. This helps increase privacy around the side and rear of your property without limiting the access.

 

Ring Latch

£6.00 inc VAT (£5.00 ex VAT)

Perfect for Garden Gates

A popular product on any garden gate the ring latch allows easy use from either side of a fully board gate. Easy to fit and sturdy in construction this ring latch suits gates that are 80-85mm thick. Please note you will need a 10mm wooden drill bit to fit this to your gate.

It comes fully galvanised to help achieve a long life span with protection against rot and rusting.

Bottom Band

£6.00 inc VAT (£5.00 ex VAT)

Similar in construction to the Top Band this product is mainly used for either much smaller gates as an alternative to the top band or in replacement of an adjustable gate eye at the bottom of the gate. It suits a 19mm gate hook.

Commonly used on garden gates, or in areas where small gates are required. This is an easy to fit and use and comes pre-drilled for one 10mm cup head square bolt which is provided free of charge. It also has a predrilled hole for an additional screw if you choose to use this. You will have to drill your gate style so you will need a 10mm wood drill bit, which we can provide if required.

Drop Over Frame (No Handle) 14″

£6.00 inc VAT (£5.00 ex VAT)

Light Drop Over Frame For Shorter Gates

This is a lighter weight product than the drop over frame with handle and is predominately used by the gardener and landscaper for small shorter gates that need a lighter drop over frame.

One massive benefit to this drop over frame is that without the handle it has a much sleeker looker on the gate once closed, for this reason it is popular with more modern gate ways and those not wanting ironmongery to be seen.

4 Hole Hook On Plate

£9.00 inc VAT (£7.50 ex VAT)

Heavy Duty Gate Hanging Hooks

This is a standard product for all landscapers, small holders, contractors and farmers. The four hole hook on plate is normally used on square gate posts as the four fixing points and large back plate give a sturdy and strong backing to hang any gate from 600mm to 4800mm.

The hook on plate is easy to fix and we recommend using 100mm coach screws complete with washers.

Adjustable Bottom Eye & Clips

£9.60 inc VAT (£8.00 ex VAT)

Commonly used on the bottom of wooden gates, the adjustable gate eye allows you to adjust the level and swing elevation of your gate. This is useful as over time gates tend to relax and drop, this means the shutting end of the gate tends to get lower. By adjusting the two heavy duty 20mm nuts you can level the gate up.

The adjustable eye comes as standard in a our full gate hanging kits but its great for adjustability if required just on its own. Some of our customers use two of these on home made gates and doors to allow for great adjustment over time.

Drop Over Frame (with handle) 14″

£9.60 inc VAT (£8.00 ex VAT)

This is our most popular drop over frame.

Its strong construction made out of 4mm thick mild steel which provides a real heavy duty drop over frame.

It is used when two gates are used as a pair that shut together, the drop over frame stops the gates from moving and twisting over time by securing them together. Its a must for all double gate openings.

It neatly hinges on one gate (usually the larger) to fold over the other. If the two gates are the same length it doesn’t matter which side it goes on. When you need to open the gates it rotates all the way back over and on to the gate it is hinged on.

 

 

Lockable Drop Bolt (24″)

£10.80 inc VAT (£9.00 ex VAT)

The lockable drop bolt is perfect for gateways that are either away from your property or you need additional security at certain times. They are popular with home owners on their drive ways so these gates can be locked shut during work hours or holidays, giving you some additional peace of mind.

Easy to fit they come complete with fittings to suit a 60mm thick gate, if your gate is thicker than this please inform us during the purchase of this product. If you buy this lockable drop bolt and one of our gates we will automatically send you fittings to suit.